parallel to serial converter using mux and flipflops

The previous output and the parallel data input are connected to the input of the Multiplexer and output of the Mux is connected to the next Flip-Flop. A Multiplexer is connected at the input of each Flip-Flop. data is fed separately to each input of Flip Flop and produces a required serial output. PISO mode of Shift Registers allows parallel data input i.e. 3 – Schematic of Serial In – Parallel Out (SIPO) Mode Parallel In – Serial Out (PISO) Mode In addition to the CLK Signal, Clear (CLR) signal is also connected to all the Flip-Flops to ‘RESET’ them.įig.

Fig.3 shows a SIPO mode consisting of 4 D-Type Flip-Flop’s (FF 0, FF 1, FF 2 and FF3).

one bit at a time through a single data line and produces a parallel output. The SIPO mode of Shift Registers accepts data serially i.e. 2 – Schematic of Serial In – Serial Out (SISO) Mode Serial In – Parallel Out (SIPO) Mode They are connected serially with the same clock (CLK) signal applied to each Flip-Flop.įig. 2 below shows a SISO mode of Shift Register consisting of 4 D-Type Flip-Flops (FF 0, FF 1, FF 2 and FF3).

The stored information is produced as its output. the data transmitted is one bit at a time in either left or right direction. SISO mode accepts data serially under clock control i.e. Parallel In – Parallel Out (PIPO) Mode Serial in – Serial Out (SISO) Mode.There are four basic modes of operation based on the movement of data in the Registers and they are: 1 – Schematic Diagram of Shift Register Modes of Operation of Shift Registers 1 below shows the schematic diagram of Shift Register.įig. They are basically configured using Flip-Flops in sequence where the output of one Flip-Flop becomes input to the other.įlip-Flops make an ideal choice in designing them as they are edge- triggered devices and can retain output state. Shift Registers are basically a type of sequential logic circuit used to “store” and “shift”/ “transfer” data bits either in serial or parallel or a combination of both serial and parallel. This post provides a detailed explanation about Shift Registers, its modes of operation, types, working principle, applications, advantages and disadvantages. Shift Registers which are designed using Flip-Flops are the devices that stores and transfers the data bits.

Parallel to serial converter using mux and flipflops